Alarm; Weather Forecast; Temperature And Humidity; Near-Far Function - Oregon Scientific BAR200 User Manual

ALARM

To set the alarm:
1. Press and hold ALARM.
2. Press / to set hour / minute.
3. Press ALARM or MODE to confirm.
is ON.
To toggle alarms ON / OFF:
1. Press ALARM to display alarm time
2. Press ALARM again to turn alarm ON / OFF.
To silence the alarms:
•
Press SNOOZE to silence it for 8 minutes
OR
•
Press any other key to turn the alarm off and activate it
again after 24 hours.

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius (US- with a 75%
accuracy).
Sunny Partially
Cloudy
BAR200A_EN_R0.indd 5
indicates alarm
Cloudy Rainy
5

TEMPERATURE AND HUMIDITY

To toggle temperature unit:
Press °C / °F.

NEAR-FAR FUNCTION

To enable Near-Far function:
Slide SCROLL / MANUAL / SENSOR to SENSOR position
to automatically change it's display to reveal the indoor /
outdoor temperature when you approach within 2 feet of the
clock as shown below.
To disable Near-Far function:
Slide SCROLL / MANUAL / SENSOR to MANUAL position
to only show the display it is currently on.
Alternatively, slide to SCROLL to scroll through both
displays.
NOTE When the radio-controlled clock is receiving data,
the Near-Far function will be disabled to prevent interrupting
the clock signal.
8/13/07 4:47:45 PM