Oregon Scientific EB313HGN - Handheld Weather Station Manual

PRODUCT OVERVIEW

1. SNOOZE / LIGHT button
2. Weather Forecast & Barometric Trend Area
3. Temperature & Humidity Area
4. Clock / Alarm Area
5. Moon Phase
6. ALARM: view alarm status; set alarm
7. MEM: view current, maximum and minimum temperature / humidity readings
8. MODE: change display / settings
9. + and –: increase or decrease setting
10. Strap hole
11. : enable / disable alarm
12. : lock button
13. Table stand / Belt clip
14. Battery compartment
15. °C / °F switch
16. RESET hole

GETTING STARTED

BATTERIES

This unit operates with 2 x CR2032 batteries. Insert batteries before first use, matching the polarity as shown in the battery compartment.

NOTE shows the batteries are low.

TABLE STAND OR BELT CLIP

You can wear the belt clip on your belt or use it as a stand. To use the belt clip as a stand, remove the belt clip from the back of the monitor. Insert the left or right side of the clip into the lower part of the slot then snap the other side of the clip into the other lower slot.

CLOCK

This product shows the current time, and day-of-week in English, French, German, Italian, or Spanish.

SET CLOCK

1. Press and hold MODE for 2 seconds. The Clock Area will blink.
2. Select the hour, minute, year, month, day, and language. Press + or – to change the setting. Press MODE to confirm.

NOTE The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish.

SWITCH CLOCK DISPLAY

Press MODE to toggle between Clock with Seconds and Clock with Weekday display.

ALARM

This product is equipped with a 2-minute alarm.

VIEW ALARM SETTINGS

Press ALARM. The Alarm Time and ((.)) icon will show in the Clock Area.

SET ALARM

1. Press ALARM to switch to Alarm display.
2. Press and hold ALARM again for 2 seconds. The Alarm settings will blink.
3. Select the hour and minute. Press + or – to change settings. Press ALARM to confirm.

ACTIVATE ALARM

Press to activate or deactivate the Alarm. shows in the Clock / Alarm Area when the Alarm is activated.

SILENCE ALARM

When the Alarm time is reached, the alarm will sound for 2 minutes. Press SNOOZE / LIGHT to silence it for 8 minutes. Or, press to turn it off until the next day.

If no button is pressed, the Alarm will automatically silence after 2 minutes. It will then sound again after 8 minutes.

BAROMETER

This product tracks barometric pressure changes over the past 24 hours to provide the weather forecast and a trend line showing the direction of barometric change.

BAROMETRIC TREND

TREND	DESCRIPTION
	Rising
	Steady
	Falling

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius with 70 to 75 percent accuracy. The weather forecast is always displayed.

CLEAR	PARTLY CLOUDY	CLOUDY	RAINY	SEVERE WEATHER

TEMPERATURE AND HUMIDITY

This product can display current, minimum, and maximum temperatures and humidity percentage information.

SELECT TEMPERATURE UNIT

Slide the °C / °F switch into the desired location. The switch is located inside the battery compartment.

MOON PHASE

The Calendar must be set for this feature to work. Press + or – to view the moon phase for the next or previous day. Press and hold + or – to scan quickly through the years (2001 to 2099).

BACKLIGHT

Press SNOOZE / LIGHT to activate the backlight.

KEY LOCK

The buttons may be locked to avoid accidental changes.

To activate lock, press and hold LOCK for two seconds. Repeat the same procedure to unlock buttons.

PRECAUTIONS

• Do not subject the unit to excessive force, shock, dust, temperature or humidity.
• Do not cover the ventilation holes with any items such as newspapers, curtains etc.
• Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive materials.
• Do not tamper with the unit's internal components. This invalidates the warranty.
• Only use fresh batteries. Do not mix new and old batteries.
• Images shown in this manual may differ from the actual display.
• When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste.
• Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information.
• The contents of this manual may not be reproduced without the permission of the manufacturer.
• Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
• Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before first use.

NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice.

NOTE Features and accessories will not be available in all countries. For more information, please contact your local retailer.

SPECIFICATIONS

TEMPERATURE

Unit: °C or °F

Temperature Range: -20.0°C to +60.0°C (-4.0°F to +140°F)

RELATIVE HUMIDITY

Range: 25% to 95%

BAROMETER

Weather Forecast: Rainy, cloudy, partly cloudy, sunny, severe weather

Suggested operating temperature for a more accurate weather forecast: 0°C to +60°C (32°F to +140°F)

CLOCK

Clock display: HH:MM:SS

Hour format: 24hr

Calendar: DD/MM; weekday in 5 languages (E, D, F, I, S)

Alarm: 2-minute single alarm

POWER

Main unit batteries: 2 x CR2032 Lithium batteries

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If you're in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support.asp

For international inquiries, please visit: www2.oregonscientific.com/about/international.asp

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientific, declares that this Handheld Weather Station (Model: EB313HGN) is in compliance with EMC directive 2004/108/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.