Advertisement
LOCATION | MEANING |
Clock / alarm and Indoor temperature area | Main unit batteries low |
Outdoor temperature area | Sensor batteries low |
Connect the supplied power adapter to the power jack, then plug into a standard AC outlet.
NOTE
The main unit can collect data from up to 3 sensors.
To set up the sensor:
TIP
Ideal placements for the sensor would be in any location on the exterior of the home at a height of not more than 5 ft and which can shield it from direct sunlight or wet conditions for an accurate reading.
NOTE
Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing.
To search for a sensor:
Press and hold + MODE.
The sensor reception icon in the remote sensor area shows the status:
ICON | DESCRIPTION | ||
Main unit is searching for sensor(s) | |||
A channel has been found. | |||
The sensor cannot be found. |
TIP
The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results.
This product is designed to synchronize its clock automatically with a clock signal.
Slide EU / UK to select the signal received.
To enable / disable signal reception:
Press and hold to enable or to disable signal reception.
NOTE
Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal. If signal reception is unsuccessful, place your unit next to a window, press and hold to force another signal search.
Clock signal reception indicator:
STRONG SIGNAL | WEAK SIGNAL | NO SIGNAL |
To set the clock manually, disable the signal reception first.
Time zone offset sets the clock +/- 23 hours from the received clock signal time.
NOTE
The language options are English (E), German (D), French (F), Italian (I), and Spanish (S).
To select display mode:
Press MODE to choose between clock with seconds / weekday / calendar / moon phase.
This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius with a 75% accuracy.
Sunny | |
Partially Cloudy | |
Cloudy | |
Rainy | |
Snowy |
The weather warning messages provide indications of probable circumstances that may arise based on the weather station's calculations. The meanings for the warnings are illustrated below:
Warning | Meaning |
Risk of high temperatures | |
Risk of fast wind speeds | |
Risk of a storm | |
Risk of foggy conditions | |
Risk of icy conditions |
To toggle temperature unit:
Press °C / °F.
To auto-scan between sensors:
Press and hold + MEM to display each sensor's data for 3 seconds.
To end press .
To toggle between current, minimum and maximum records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM.
If the channel 1 sensor falls between 3°C to -2°C (37°F to 28°F), LED indicator will flash, and will stop flashing once the temperature is out of this range.
The temperature, humidity and pressure trend icons are based on recent sensor readings.
RISE | STEADY | FALL |
In moon phase mode, press or to scan through the years (2001 to 2099).
New Moon | Full Moon | ||
Waxing Crescent | Waning Gibbous | ||
First quarter | Last quarter | ||
Waxing Gibbous | Waning Crescent |
NOTE
Star icons around the moon phase will be displayed from 6 o'clock in the evening to 6 o'clock the next morning.
Press LIGHT to activate backlight for 5 seconds.
Press RESET to return to the default settings.
NOTE
The technical specifications for this product and the contents of the user manual are subject to change without notice.
NOTE
Features and accessories will not be available in all countries. For more information, please contact your local retailer. To download an electronic version of the user manual, please visit http://global.oregonscientific.com/customerSupport.php.
TYPE | DESCRIPTION |
MAIN UNIT | |
L x W x H | 94 x 51 x 182.5 mm (3.70 x 2.01 x 7.19 in) |
Weight | 241 g (8.5 oz) without battery |
Temperature range | -5°C to 50°C (23°F to 122°F) |
Resolution | 0.1°C (0.2°F) |
Signal frequency | 433 MHz |
Humidity range | 25% - 95% |
Humidity resolution | 1% |
Power | 3 x UM-3 (AA) 1.5 V batteries DC 5V 100 mA adapter |
REMOTE UNIT (THGN132N) | |
L x W x H | 50 x 22 x 96 mm (1.97 x 0.87 x 3.78 in) |
Weight | 62 g (2.22 ounces) without battery |
Transmission range | 30 m (98 ft) unobstructed |
Temperature range | -20°C to 60°C (-4°F to 140°F) |
Humidity range | 25% - 95% |
Power | 1 x UM-3 (AA) 1.5 V battery |
Visit our website www.oregonscientific.com to learn more about Oregon Scientific products.
For any inquiry, please contact our Customer Services at info@oregonscientific.com.
Oregon Scientific Global Distribution Limited reserves the right to interpret and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency between the English version and any other language versions, the English version shall prevail.
Hereby the manufacturer, IDT Technology Limited, declares that the radio equipment type [Colour LCD Advance Weather Station & Model: BAR208S/ BAR208SA] is in compliance with 2014/53/EU Directive. The full text of the EU Declaration of Conformity is available at the following internet address: www.oregonscientific.com
The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientific.com, or on the warranty card for this product) for all inquiries instead.
We
Name: Oregon Scientific, Inc.
Address: Centerpointe CENTER 5 Centerpointe DRIVE, SUITE 400 LAKE OSWEGO, OREGON 97035
Telephone No.: 971-204-0378
declare that the product
Product No.: BAR208S/BAR208SA
Product Name: Colour LCD Advance Weather Station
Manufacturer: IDT Technology Limited
Address: Block C, 9/F, Kaiser Estate, Phase 1,41 Man Yue St., Hung Hom, Kowloon, Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE), and pursuant to and in accordance with Article 20 of the Directive 2006/66/EC of the European Parliament on batteries and accumulators and waste batteries.
The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.
Please note that the batteries/rechargeable batteries must be removed from the equipment before it is given as waste. To remove the batteries/accumulators refer to the specifications in the user manual. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.
The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposal of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Oregon Scientific BAR208S/BAR208SA - Colour LCD Advance Weather Station Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the BAR208S that isn't answered in the manual? Leave your question here.