Reset The Base - VTech LS6245 User Manual

Note:
If the old system PIN is wrong, you will hear an error tone and be asked to enter it again.
4. Press OK to enter the four-digit new system PIN.
5. Press OK to enter the four-digit new system PIN again.
6. Press OK to confirm.
Note:
If the new PIN entered in Step 5 is not matched with the new system PIN entered in Step 4, user is requested to enter the old system PIN again
in Step 3.
8.17

Reset the base

< >
1. Press MENU and / to select SETTINGS.
< >
2. Press SELECT and / to select RESET.
3. Press SELECT to enter the four-digit system PIN. (Default is 0000)
4. Press OK to confirm.
5. Press YES to reconfirm, or press NO to cancel.
57