10.9.2 Playback the announcement
You can play the announcement in the handset or base.
1. Press MENU to select ANS. SYSTEM.
<
2. Press SELECT and
<
3. Press SELECT and
4. Press SELECT to select PLAY.
<
5. Press SELECT and
6. Press SELECT to confirm and the announcement will automatically play.
10.9.3 Delete the recorded announcement
You can delete the recorded announcement message to set the default announcement message back through your base as below.
1. Follow steps from 1 to 6 in Section 10.9.2.
f
2. Press
to delete the recorded announcement. And the announcement message will be reset to default.
Note:
You can't delete the default announcement.
10.10 Answering machine message
If you have new messages, the base screen light will turn on and e.g. "3 NEW MESSAGES" will flash in base screen, which means you have 3
new messages in your answering machine. And the
off the base screen light. When the answering machine is playing message, the base screen will display "PLAYING MESSAGE MESSAGE [X /
Y]" which prompts you which message is playing and how many messages in your answering machine.
67
>
/
to select ANS SYS SETUP.
>
/
to select ANNOUNCEMENT.
>
/
to select ANSWER & RECORD or ANSWER ONLY.
will display on your base and handset screen. You can press OFF on the base to turn