Incoming Call Messages (Icm); Answering Machine Settings; Set Answer Mode; Set Number Of Rings To Answer - VTech LS6245 User Manual

10.5

Incoming Call Messages (ICM)

If the answering machine is ON and set for ANSWER & RECORD, when there is an incoming call, the answering machine will answer it and
play the pre-set announcement message, followed by a beep sound. The caller can then leave a message. The caller's voice will also be
played through the loudspeaker to allow you to screen the call and decide if you want to leave the answering machine to record the message,
or if you want to talk to the caller directly.
At any time if you want to pick up the call, you can press
the caller directly. The message recording will be stopped automatically. If the answering machine is in the process of recording, the message
already recorded will be saved.
10.6

Answering Machine Settings

10.6.1 Set answer mode

1. Press MENU to select ANS. SYSTEM.
U
2. Press SELECT and /
U
3. Press SELECT and /
U
4. Press SELECT and /
5. Press OK to confirm.

10.6.2 Set number of rings to answer

You can set the answer delay to 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER, e.g. if you set the answer delay to 2 RINGS, your
answering machine will answer the call after the caller hearing two rings.
1. Press MENU to select ANS. SYSTEM.
U
2. Press SELECT and /
U
3. Press SELECT and /
U
4. Press SELECT and /
5. Press OK to confirm.
Note:
If the Time Saver setting is selected, the answering machine will pick up the call after two rings if there are new messages and after four rings if
there is no new message.
63
T
D
to select ANS SYS SETUP.
D
to select ANSWER MODE.
D
to select ANSWER & RECORD or ANSWER ONLY.
D
to select ANS SYS SETUP.
D
to select ANSWER DELAY.
D
to select 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER.
S
or on the handset or press
h
on the base to intercept the call and talk to