Pair And Connect A Headset; Paired Devices - VTech LS6245 User Manual

4.5

Pair and connect a headset

Before you begin, make sure that your Bluetooth enabled headset is not connected to any other Bluetooth device. Refer to your headset user's
manual to learn how to search for or add new Bluetooth devices.
< >
1. Press MENU and /
<
2. Press SELECT and
Note:
If a device is already connected to the telephone base, "CONNECTED DEVS WILL BE TEMP. DISCONNECTED" displays. Press OK to
temporarily disconnect the device and continue the pairing process.
3. Set your headset to discoverable mode.
4. Press NEXT on the base to search for your headset.
5. Once the telephone base finds your headset, press SELECT.
6. Enter the PIN of your headset (the PIN for most Bluetooth devices is 0000), then press SELECT. The screen displays "HEADSET SETUP
COMPLETE" and then "CONNECT HEADSET TO BASE?"
7. Press YES. When a device is successfully connected, "DEVICE CONNECTED TO BASE", and
Note:
When you already have two devices on the active devices list, press YES to connect to your paired headset. You are prompted to replace an
existing device on the active devices list.
The pairing process may take up to one minute. If the pairing process fails, try again.
4.6

Paired Devices

All paired devices are stored on the paired devices list. Up to four devices (one headset only) can be paired with the telephone base.
To use a paired device, it must be connected and on the active devices list.
Note:
Only 15 characters of the device name can be stored on the paired devices list.
15
on the base to select BLUETOOTH.
>
/ to select SETUP HEADSET, and then press SELECT.
1 2
and/or displays.