Technical Support - Siemens SINAMICS S120 Manual

Standard scope
The scope of the functionality described in this document can differ from the scope of the
functionality of the drive system that is actually supplied.
● Other functions not described in this documentation might be able to be executed in the
● The documentation can also contain descriptions of functions that are not available in a
● Extensions or changes made by the machine manufacturer must be documented by the
For reasons of clarity, this documentation does not contain all of the detailed information on
all of the product types. This documentation cannot take into consideration every
conceivable type of installation, operation and service/maintenance.

Technical support

Country-specific telephone numbers for technical support are provided in the Internet under
Contact:
http://www.siemens.com/automation/service&support
EC declarations of conformity
The EC Declaration of Conformity for the EMC Directive and for the Low-Voltage Directive
can be found/obtained from the relevant regional office of the I DT MC and I DT LD Business
Units of Siemens AG.
Note
Low-voltage directive
When operated in dry operating areas, SINAMICS equipment with AC motors conforms to
Low-Voltage Directive 2006/95/EC.
Note
EC declaration of conformity
In the configuration specified in the corresponding EC Declaration of Conformity regarding
EMC requirements and when the EMC installation guideline, order no. 6FC5297-0AD30-0*P*
is observed, SINAMICS devices conform to EMC Directive 89/336/EEC and 2004/108/EC.
(*A: German; *B: English)
Note
Machinery directive
The devices satisfy the requirements according to Machinery Directive 2006/42/EC for the
Safety Integrated safety functions.
Chassis power units
Manual, (GH3), 01/2013, 6SL3097-4AE00-0BP3
drive system. This does not, however, represent an obligation to supply such functions
with a new controller or when servicing.
particular product version of the drive system. The functionalities of the supplied drive
system should only be taken from the ordering documentation.
machine manufacturer.
Preface
5