Configuring Recording Parameters - Lorex LH120 Series Instruction Manual
Digital video surveillance recorder
Hide thumbs
Also See for LH120 Series:
- Brochure & specs (5 pages) ,
- Quick setup manual (2 pages) ,
- Upgrade instructions (2 pages)
Table of Contents
Advertisement
Remote Viewing
3
Select the Privacy Zone checkbox to enable privacy masking.
4
Drag your mouse cursor over the area you wish to black out. A red box indicates the area that
is masked (blocked out).
• To remove the privacy area, click on the red box, then click the Delete button.
5
Click Save to apply your settings.
Configuring Recording Parameters
To configure system recording parameters:
1
Click the Remote Setting>Record>Rec Parameters.
2
Configure the following:
• Channel: Select the channel you wish to configure.
• Record: Select Enable or Disable to start or stop system recording.
• Pack Duration: Select the duration of each saved file on the system. For example, if you select
15 minutes, then every file will contain 15 minutes of footage.
• Pre-record: Select whether to enable or disable pre-recording.
3
Click Save to apply your settings.
68
Drag mouse over desired area
Advertisement
Table of Contents
