Accessing Your Dvr Within A Local Network (Lan); Prerequisites - Lorex LH120 Series Instruction Manual

Accessing your DVR within a local network (LAN)

You can connect to your DVR through Internet Explorer through the local area network
(LAN).
NOTE: This method only works if your computer is on the same network as the DVR.

Prerequisites

• Connect the ethernet cable from your router to the DVR
• DVR must be in the same network as the computer connecting to the DVR
To connect your DVR to the Local Area Network (LAN):
1 Power off your system by disconnecting the power cable from the rear panel.
2 Connect an Ethernet cable (included) to the LAN port on the rear panel of the system.
Connect the other end of the Ethernet cable to an empty LAN port (usually numbered 1~4) on
your router.
3 Reconnect the power cable to power the system back on.
NOTE: Make sure the power switch is set to I.
INTERNET
(not required for
local viewing)
ROUTER
(Not Included)
Remote Connectivity
Ethernet Cable
PC
(Not Included)
51