Step 3 Of 4: Enable Ddns On The Dvr - Lorex LH120 Series Instruction Manual

Click Save to register your product for DDNS. A confirmation email will be sent to the email
address used to register for My Lorex.
You will need this information for remote access to your system. Record your information below:
Domain name/URL Request:
DDNS User Name:
DDNS Device password:

Step 3 of 4: Enable DDNS on the DVR

To enable DDNS in your DVR:
1 Right-click to open the menu bar and click the Main Menu button (
2 Click Network>DDNS.
3 In the DDNS drop-down menu, select Enable. Beside Server, select LOREXDDNS (default).
4 Enter the following into the DDNS Setup menu:
• Host Name: Enter the Domain name/URL Request that was emailed to you after DDNS
registration.
• User Name: Enter your DDNS User Name that was e-mailed to you after DDNS registration.
• Password: Enter your DDNS Device Password that was e-mailed to you after DDNS
registration.
Example of entering DDNS information in the DDNS setup menu.
5 Click Apply to save your settings. Click OK.
tomsmith
tsmith01
******
Enable
Select
Host Name:
Enter Domain name/URL Request
User Name:
Enter DDNS User Name
Password:
Enter DDNS Device Password
Remote Connectivity
).
57