Preparing Car Seat For Use; Assemble The Back Support; Determine The Use Mode And Prepare The Car Seat For Your Child; Select A Vehicle Seating Location To Install The Car Seat - Baby Trend HYbrid 3-in-1 Owner's Manual

Preparing Car Seat for Use

4.0
The steps to prepare the Car Seat for use with your child are
outlined below and described in detail in this owner's manual.
Assemble the Back Support (see "Assembly and
4.1
Removal of Back Support" section)
Before using your Car Seat in your vehicle, you must assemble
the Back Support to the Seat Base (see "Assembly and Removal
of Back Support" section).
Determine the Use Mode and Prepare the Car Seat
4.2
for your Child
Toddler Car Seat WITH
(10 to 23 kg) (see Weight and Height Recommendations"
section).
- Use Body Insert with smaller child.
- Harness strap height must be at or
above child's shoulder.
- Adjust the harness strap height to fit
your child (see "Changing Harness Strap
Height" section).
- Discontinue use of Body Insert when child's
shoulders are at or above top harness strap slots.
High-back Booster Car Seat
"30 - 100 lbs." (13.6 to 45 kg) (see Weight and Height
Recommendations" section).
- Remove the harness system for Booster Car Seat Use
(see "Harness Removal and Assembly" section).
- Remove Body Insert.
- Adjust head support for your child (see"Adjusting the Head
Support" section).
Built-in Harness System "22 - 50 lbs."
WITHOUT Harness System
13
Preparing Car Seat for Use
4.0
Backless Booster Car Seat
"40 - 100 lbs." (18 to 45 kg) (see Weight and Height
Recommendations" section).
- Remove Back Support (see "Assembly and Removal of
Back Support" section).
Select a Vehicle Seating Location to Install the
4.3
Car Seat
Toddler Car Seat WITH
• Select a vehicle seating location with a tether anchor, if
available. Baby Trend requires using the tether for
installation whenever possible.
Note: The belt routing for installation is dependent on
Tether use. Use "Front Entry" belt routing when
WITH a Tether. Use "Rear Entry" belt
using
routing when using
Booster Car Seat WITHOUT
• Select a vehicle seating location with a lap/shoulder belt.
• Never use a vehicle seating location with only a lap belt.
WITHOUT Harness System
Built-in Harness System
WITHOUT a Tether.
Harness System
14