Preparing Car Seat For Use; Assemble The Back Support; Determine The Use Mode And Prepare The Car Seat For Your Child; Select A Vehicle Seating Location To Install The Car Seat - Baby Trend FB58944 Owner's Manual

Baby trend hybrid 3-in-1 car seat owner's manual
Table of Contents

Advertisement

Preparing Car Seat for Use

4.0
The steps to prepare the Car Seat for use with your child are
outlined below and described in detail in this owner's manual.
Assemble the Back Support (see "Assembly and
4.1
Removal of Back Support" section)
Before using your Car Seat in your vehicle, you must assemble
the Back Support to the Seat Base (see "Assembly and Removal
of Back Support" section).
Determine the Use Mode and Prepare the Car Seat
4.2
for your Child
Toddler Car Seat
WITH
(10 to 23 kg) (see Weight and Height Recommendations"
section).
- Use Body Insert with smaller child.
- Harness strap height must be at or
above child's shoulder.
- Adjust the harness strap height to fit
your child (see "Changing Harness Strap
Height" section).
- Discontinue use of Body Insert when
child's shoulders are above Harness
Strap Slots in second row up from the
bottom on the back support.
High-back Booster Car Seat
"30 - 100 lbs." (13.6 to 45 kg) (see Weight and Height
Recommendations" section).
- Remove the harness system for Booster Car Seat Use
(see "Harness Removal and Assembly" section).
- Remove Body Insert.
Built-in Harness System "22 - 50 lbs."
WITHOUT
Harness System
13
Preparing Car Seat for Use
4.0
- Adjust head support for your child (see"Adjusting the Head
Support" section).
Backless Booster Car Seat
"40 - 100 lbs." (18 to 45 kg) (see Weight and Height
Recommendations" section).
- Remove Back Support (see "Assembly and Removal of
Back Support" section).
Select a Vehicle Seating Location to Install the
4.3
Car Seat
Toddler Car Seat
WITH
• Select a vehicle seating location with a tether anchor, if
available. Baby Trend requires using the tether for
installation whenever possible.
Note: The belt routing for installation is dependent on child's
WEIGHT and TETHER use. Use "Installation Options Base on
Child's Weight" information in Toddler Car Seat (WITH Built-in
Harness System) Installation and Use Section.
Booster Car Seat
WITHOUT
• Select a vehicle seating location with a lap/shoulder belt.
• Never use a vehicle seating location with only a lap belt.
WITHOUT
Harness System
Built-in Harness System
Harness System
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fb58645Fb58145Fb58588Fb58935Fb58718Fb58745

Table of Contents