Baby Trend HYbrid 3-in-1 Owner's Manual page 20

Toddler Car Seat
7.0
Harness) Installation and Use
1. Loosen Top Tether by pressing the button on
the Tether Adjuster and sliding belt through
adjuster .
1
2. Unhook Top Tether Hook from vehicle tether
anchor. Press up on retainer
Tether Hook , and remove
3
3. Unbuckle vehicle seat belt and remove
seat belt from belt path.
7.3.3 Installation - Lap Belt Only
WARNING!
• Vehicle seat belt system MUST stay tightly adjusted to car
seat at all times. If vehicle seat belt does not stay tight, read
vehicle owner's manual and "Vehicle Seat Belts" section in
this manual.
(With Built-in
4
3
2
, unhook
2
.
4
WITH Top Tether
37
Toddler Car Seat
7.0
Harness) Installation and Use
To secure car seat in vehicle:
1. Assemble the Back Support (see "Assembly
and Removal of Back Support" section).
1 2. Store LATCH connectors on back of seat.
3. Adjust the harness strap height for
your child – Harness straps MUST
be at or above the child's shoulders
(see "Changing Harness Strap
Height" section).
4. Place Top Tether over the top of the
Head Support and rest inside seat.
5. Place the car seat on the vehicle seat in
a seating location equipped with Lap belt
and centered between the Lap belt
anchorages (see "Selecting a Vehicle
Seating Location" section).
6. If the vehicle seat back is adjustable,
adjust into the upright position or the
position specified in the vehicle owner's
manual for use with a car seat.
(With Built-in
LATCH Connectors
Top
Tether
38