Baby Trend HYbrid 3-in-1 Owner's Manual page 17

Toddler Car Seat
7.0
Harness) Installation and Use
9. Place knee inside seat
1
pressing down, pull on the free end of the
LATCH lower anchor belt to tighten the
LATCH lower anchor belt around the
car seat .
2
10. Attach Top Tether Hook to vehicle tether
anchor and . Listen for the "click"
1
2
when the tether hook locks onto the
vehicle tether anchor.
11. Pull on the Top Tether Strap to check that
the Tether Hook is securely attached
12. Pull on free end of Top Tether Strap until
all slack is removed from the Top Tether
(With Built-in
and while
2
1
2
.
3
.
4
Tether
Adjuster
31
Toddler Car Seat
7.0
Harness) Installation and Use
13. Check for a secure installation by
grasping the car seat armrest and
pushing side-to-side and front-to-back.
1
The car seat should not move more
than 1 inch in either direction.
• If the car seat moves more than
Top
• If the car seat moves less than 1 inch,
Tether
4
3
(With
1 inch, retighten the LATCH belt
and Top Tether and test again.
installation is complete. However if the
car seat still moves more than 1 inch,
try another seating position or see the
"Vehicle Seat Belts" section and check
your vehicle owner's manual for
information on securing car seats.
32
Built-in