Baby Trend HYbrid 3-in-1 Owner's Manual page 32

Booster Car Seat
8.0
(Without Built-in Harness)
Installation and Use
5. If the vehicle seat back is adjustable, adjust
into the upright position or the position
specified in the vehicle owner's manual
for use with a car seat.
6. Thread shoulder belt into the
inner slot of Booster Shoulder
Belt Guide located on the
underside of the Head Support.
- Slide shoulder belt into open
end of slot, around Belt Retainer
Tab and into Inner Slot of Head Support.
NOTE: Vehicle shoulder belt must slide freely
in inner slot of Booster Shoulder Belt
Guide.
7. Place child in High-back Booster Car Seat
with child's back and rump contacting seating
surfaces.
8. Pull the vehicle lap/shoulder belt across front
of child and under both armrests. Buckle
vehicle seat belt.
- Vehicle shoulder belt on buckle side must
be under armrest.
- Position vehicle lap belt under armrests
and low on hips, contacting
top of thighs.
- Position vehicle shoulder
belt across chest and
shoulder.
Inner
Slot
Belt
Retainer
Tab
61
Booster Car Seat
8.0
(Without Built-in Harness)
Installation and Use
9. Adjust Head Support so that the vehicle
shoulder belt passes over the shoulder
midway between the neck and the end
of the shoulder. The Booster Shoulder
Belt Guide in the Head Support should
be just above the child's shoulders.
10. Snugly adjust the vehicle lap/shoulder
belt according to the instructions in the
vehicle owner's manual. Vehicle lap belt
must stay under both armrests.
62