DGS-3312SR Stackable Gigabit Layer 3 Switch
802.1X Authenticator Settings
To display the current 802.1X Authenticator Settings on the Switch, click Configuration > Port Access Entity > 802.1x
Authenticator Settings, which will display the following window.
st
Figure 4- 20. 1
802.1X Authenticator Settings window
To configure the 802.1X Authenticator settings for a given port, click on the blue port number link under the Port heading.
This will open the second 802.1X Authenticator Settings window, as shown below.
nd
Figure 4- 21. 2
802.1X Authenticator Settings window
56