Igmp Snooping Table - D-Link DGS-3312SR Release 3.5 Manual

IGMP Snooping Group
This window allows the Switch's IGMP Snooping Group Table to be viewed. IGMP Snooping allows the Switch to read
the Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch. The
number of IGMP reports that were snooped is displayed in the Reports field.
To view the IGMP Snooping Group Table, click IGMP Snooping Group on the Monitoring menu:
The user may search the IGMP Snooping Group Table by VLAN Name by entering it in the top left hand corner and
clicking Search.
The following field can be set:
Parameter
VLAN Name
Multicast Group
MAC Address
Reports
Port Member
DGS-3312SR Stackable Gigabit Layer 3 Switch
Figure 8- 20. IGMP Snooping Table window
Description
The VLAN Name of the multicast group.
The IP address of the multicast group.
The MAC address of the multicast group.
The total number of reports received for this group.
These are the ports where the IGMP packets were snooped are displayed.
NOTE: To configure IGMP snooping for the switch, go to the
Configuration folder and select IGMP Snooping. Configuration and other
information concerning IGMP snooping may be found in Section 4 of this
manual under IGMP Snooping.
220