802.1Q Static Vlans - D-Link DGS-3312SR Release 3.5 Manual

DGS-3312SR Stackable Gigabit Layer 3 Switch

802.1Q Static VLANs

To create or modify an 802.1Q VLAN:
In the Configuration folder, open the VLANs folder and click the Static VLAN Entry link to open the following
window:
Figure 4- 51. 802.1Q Static VLANs and Current 802.1Q Static VLAN Entries window
The first 802.1Q Static VLANs window lists all previously configured VLANs by VLAN ID and name. To delete an
existing 802.1Q VLAN, click the corresponding Delete button.
To create a new 802.1Q VLAN, click the Add button. A new window appears, use this to configure the port settings and to
assign a unique name and number to the new VLAN. See the table below for a description of the parameters in the new
window.
Figure 4- 52. 802.1Q Static VLANs window - Add
To configure the newly created VLAN, select the Switch being configured from the Unit drop-down menu and provide a
unique VLAN identifier and name. Configure the port settings for VLAN membership by selecting the appropriate options
for each port. Click the Apply button to configure the VLAN port membership settings. A success or fail message appears
to confirm whether the settings have been applied. To view the VLANs that have been thus far configured, click the Show
All Static VLAN Entries hyperlink (see example below). To add another new VLAN entry, click the Add button again in
the first 802.1Q Static VLANs window.
See the table below for a description of the port VLAN membership settings.
The following fields can then be set in either the Add or Modify 802.1Q Static VLANs windows:
85