Forwarding & Filtering; Unicast Forwarding - D-Link DGS-3312SR Release 3.5 Manual

Forwarding & Filtering
The Switch allows permanent or static entries into the forwarding database (FDB). These FDB entries are MAC addresses
that will not age out. In addition, multicast forwarding may be customized to conform to rules for the different ports by
setting up multicast filter modes for each port.

Unicast Forwarding

Open the Forwarding & Filtering folder and click on the Unicast Forwarding link. This will open the Setup Static
Unicast Forwarding Table window, as shown below.
To add an entry, define the following parameters:
Parameter
VLAN ID
MAC Address
Allowed to Go Unit
Port
Click on the Add/Modify button to add a unicast MAC address to the Switch's forwarding table, or to modify a previous
entry.
DGS-3312SR Stackable Gigabit Layer 3 Switch
Figure 4- 45. Setup Static Unicast Forwarding Table window
Description
The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
The MAC address to which packets will be statically forwarded. This must be a
unicast MAC address.
Allows the designation of the module on which the above MAC address resides.
Choose the port on which the MAC address resides.
79