Sim Settings - D-Link DGS-3312SR Release 3.5 Manual

12-port gigabit layer 3 stackable switch
Hide thumbs Also See for DGS-3312SR Release 3.5:
Table of Contents

Advertisement

SIM Settings

The DGS-3312SR is set as a Candidate (CaS) switch as its factory default configuration and Single IP Management will be
disabled. To enable SIM for the Switch using the Web interface, go to the Single IP Management folder and click the
SIM Settings link, revealing the following window.
Change the SIM State to Enabled using the pull down menu and click Apply. The window will then refresh and the SIM
Settings window will look like this:
The following parameters can be set:
Parameters
Description
Use the pull down menu to either enable or disable the SIM state on the Switch. Disabled
SIM State
will render all SIM functions on the Switch inoperable.
Use the pull down menu to change the SIM role of the Switch. The two choices are:
Role State
Candidate - A Candidate Switch (CaS) is not the member of a SIM group but is connected
to a Commander Switch. This is the default setting for the SIM role of the DGS-3312SR.
Commander - Choosing this parameter will make the Switch a Commander Switch (CS).
The user may join other switches to this Switch, over Ethernet, to be part of its SIM group.
Choosing this option will also enable the Switch to be configured for SIM.
Discovery
The user may set the discovery protocol interval, in seconds, that the Switch will send out
Interval
discovery packets. Returning information to a Commander Switch will include information
about other switches connected to it. (Ex. MS, CaS). The user may set the Discovery
Interval from 30 to 90 seconds.
Holdtime
This parameter may be set for the time, in seconds, the Switch will hold information sent to it
from other switches, utilizing the Discovery Interval. The user may set the hold time from
100 to 255 seconds.
Click Apply to implement the settings changed.
After enabling the Switch to be a Commander Switch (CS), the Single IP Management folder will then contain three
added links to aid the user in configuring SIM through the web, including Topology, Firmware Upgrade and
Configuration Backup/Restore.
DGS-3312SR Stackable Gigabit Layer 3 Switch
Figure 10- 1. SIM Settings window (disabled)
Figure 10- 2. SIM Settings window (enabled)
241

Advertisement

Table of Contents
loading

Table of Contents