Inserting a new copy material roll
If the Océ 7050/7051 is equipped with the optional manual roll, you can insert
a new copy material roll as follows:
Inserting a new copy material roll
Pull open the drawer by using the two catches. (see figure 13)
1
[13] Opening the drawer section
If one of the rolls is still in use, turn the roll feeding knob in the opposite
2
direction of the arrow to let the copy material slip out of the feeder.
If you want to use the other roll in the drawer, simply feed in the material of
3
that roll as described in step 11 on page 26 and on.
The front and the back roll do not have to be switched.
Note:
24
Océ 7050/7051 User Manual