Introduction - Oce 7050 User Manual

Introduction

The Océ 7050/7051 enables copies to be made on paper, transparent, vellum
and polyester film. By pressing the copy material selection button you can
make your choice. The standard setting of the copy material selection button is
paper. Only when using film this button has to be pressed to change to film. All
other materials should be copied on the paper setting.
Make your choice before feeding the original.
Note:
It is most convenient to feed the original first. When feeding the original it is
transported to the rear of the machine. The display will show the original
length. When you now feed the copy material the original returns to the front
in order to make a copy.
Only use paper as is specified in 'Copy material that can be used' on
Note:
page 46. Avoid storing paper in rooms where temperature and humidity are
high (see 'Roomtemperature (T) and Relative Humidity (RH)' on page 44).
Also, avoid dust and direct sunlight. Wrap unused paper in plastic to prevent
it absorbing moisture.
12 Océ 7050/7051 User Manual