Yamaha RX-V1600 Owner's Manual page 57

XM@ SA TEL LITE RADIO TUNING
This section describes the functions of each control used for XM Satellite Radio tuning.
Nlflli·:
The following controls are only available when XM is selected as the input source. Rotate the INPUT selector on the front panel (or set
AMP/SOURCErrV to SOURCE and then press XM on the remote control) to select XM as the input source.
• Front panel functions
(U.S.A. model)
CD
CATEGORY
(All Channel Search mode)
Changes the channel category to next one (while staying
in the All Channel Search mode).
(Category Search mode)
Changes the channel category to next one.
(Preset Search mode)
Switches between five preset groups (A to E).
®
PRESETrrUNING/CH
<:J
II>
(All Channel Search mode)
Searches a radio channel within all channels. Press and
hold for quick search.
(Category Search mode)
Searches a radio channel within the selected category.
Press and hold for quick search.
(Preset Search mode)
Changes the preset channel number (1 to 8).
@ SEARCH MODE
Switches between the All Channel Search, Category
Search, and Preset Search modes (see page 56).
@ DISPLAY
Switches XM information such as channel number/name,
category or artist name/song title displayed in the front
panel display (see page 60).
®
MEMORY
Switches the unit to the preset memory mode.
• Remote control functions
(U.S.A. model)
CD
XM
Selects XM as the input source.
®
Cursor buttons
/11
V
I
<:J
II>
(All Channel Search mode)
Press A-E/CAT.
<:J /
I> to change the channel category.
Press PRESET/CH
/1 / V
to search a radio channel within
all channels. Press and hold for quick search.
(Category Search mode)
Press A-E/CAT.
<:J /
I> to change the channel category.
Press PRESET/CH
/1 / V
to search a radio channel within
the selected category. Press and hold for quick search.
(Preset Search mode)
Press A-E/CAT.
<:J /
I> to change the preset group (A to
E).
Press PRESET/CH
11 / ' V
to change the preset number (1 to 8).
@ XM MEMORY
Switches the unit to the preset memory mode.
@ SRCH MODE
Switches between the All Channel Search, Category
Search, and Preset Search modes (see page 56.).
®
DISPLAY
Switches XM information such as channel number/name,
category or artist name/song title displayed in the front
panel display (see page 60).
®
Numeric buttons
(All Channel Search or Category Search mode)
Use 1 to 9 and 0 to enter a channel number directly.
(Preset Search mode)
Use 1 to 8 to enter a preset channel number directly.
(j) ENT.
Confirms an entered channel number during the Direct
Number Access mode (see page 58).
53
XM@ SA TEL LITE RADIO TUNING
This section describes the functions of each control used for XM Satellite Radio tuning.
Nlflli·:
The following controls are only available when XM is selected as the input source. Rotate the INPUT selector on the front panel (or set
AMP/SOURCErrV to SOURCE and then press XM on the remote control) to select XM as the input source.
• Front panel functions
(U.S.A. model)
CD
CATEGORY
(All Channel Search mode)
Changes the channel category to next one (while staying
in the All Channel Search mode).
(Category Search mode)
Changes the channel category to next one.
(Preset Search mode)
Switches between five preset groups (A to E).
®
PRESETrrUNING/CH
<:J
II>
(All Channel Search mode)
Searches a radio channel within all channels. Press and
hold for quick search.
(Category Search mode)
Searches a radio channel within the selected category.
Press and hold for quick search.
(Preset Search mode)
Changes the preset channel number (1 to 8).
@ SEARCH MODE
Switches between the All Channel Search, Category
Search, and Preset Search modes (see page 56).
@ DISPLAY
Switches XM information such as channel number/name,
category or artist name/song title displayed in the front
panel display (see page 60).
®
MEMORY
Switches the unit to the preset memory mode.
• Remote control functions
(U.S.A. model)
CD
XM
Selects XM as the input source.
®
Cursor buttons
/11
V
I
<:J
II>
(All Channel Search mode)
Press A-E/CAT.
<:J /
I> to change the channel category.
Press PRESET/CH
/1 / V
to search a radio channel within
all channels. Press and hold for quick search.
(Category Search mode)
Press A-E/CAT.
<:J /
I> to change the channel category.
Press PRESET/CH
/1 / V
to search a radio channel within
the selected category. Press and hold for quick search.
(Preset Search mode)
Press A-E/CAT.
<:J /
I> to change the preset group (A to
E).
Press PRESET/CH
11 / ' V
to change the preset number (1 to 8).
@ XM MEMORY
Switches the unit to the preset memory mode.
@ SRCH MODE
Switches between the All Channel Search, Category
Search, and Preset Search modes (see page 56.).
®
DISPLAY
Switches XM information such as channel number/name,
category or artist name/song title displayed in the front
panel display (see page 60).
®
Numeric buttons
(All Channel Search or Category Search mode)
Use 1 to 9 and 0 to enter a channel number directly.
(Preset Search mode)
Use 1 to 8 to enter a preset channel number directly.
(j) ENT.
Confirms an entered channel number during the Direct
Number Access mode (see page 58).
53