Yamaha RX-V1600 Owner's Manual page 119

• AUTO SETUP
Before AUTO SETUP
TROUBLESHOOTING
Error message
Cause Remedy
See
page
Connect MIC!
Optimizer microphone is not connected.
Connect the supplied optimizer microphone to the
32
OPTIMIZER MIC jack on the front panel.
Unplug HPI
Headphones are connected. Unplug the headphones.
-
During AUTO SETUP
Error message Cause Remedy
See
page
Front LlR channel signal(s) is (are) not
Select the front speakers with SPEAKER A or B.
-
E~1 :NO FRONT SP
detected.
Check the front L/R speaker connections.
15
E-2:NO SURR.SP
A surround channel signal is not detected. Check the surround speaker connections.
15
E-3:NO PRNS SP A presence channel signal is not detected. Check the presence speaker connections.
15
Only right surround back channel signal is
Connect the surround back speaker to the LEFT
E-4:SBR->SBL SURROUND BACK SPEAKERS terminal if you 15
detected.
only have one surround back speaker.
Try running AUTO SETUP in a quiet environment. -
E-5:NOISV
Background noise is too loud.
Tum otT noisy electric equipment like air conditioners
or move them away from the optimizer microphone.
-
Surround back speaker(s) is (are)
Connect surround speakers when you use (a)
E-6:CHECK SUR.
connected, though surround LlR speakers
surround back speaker(s).
15
are not.
E-7:NO MIC
The optimizer microphone was unplugged Connect the supplied optimizer microphone to
32
during the AUTO SETUP procedure. OPTIMIZER MIC jack on the front panel.
The optimizer microphone does not detect
Check the microphone setting.
32
E~8:NO
SIGNAL
test tones.
Check the speaker connections and placement.
15
E-9:USER CANCEL
The AUTO SETUP procedure was
Run AUTO SETUP again. 32
cancelled due to user activity.
E-10:INTERNAL
An internal error occurred. Run AUTO SETUP again.
32
ERROR
115
• AUTO SETUP
Before AUTO SETUP
TROUBLESHOOTING
Error message
Cause Remedy
See
page
Connect MIC!
Optimizer microphone is not connected.
Connect the supplied optimizer microphone to the
32
OPTIMIZER MIC jack on the front panel.
Unplug HPI
Headphones are connected. Unplug the headphones.
-
During AUTO SETUP
Error message Cause Remedy
See
page
Front LlR channel signal(s) is (are) not
Select the front speakers with SPEAKER A or B.
-
E~1 :NO FRONT SP
detected.
Check the front L/R speaker connections.
15
E-2:NO SURR.SP
A surround channel signal is not detected. Check the surround speaker connections.
15
E-3:NO PRNS SP A presence channel signal is not detected. Check the presence speaker connections.
15
Only right surround back channel signal is
Connect the surround back speaker to the LEFT
E-4:SBR->SBL SURROUND BACK SPEAKERS terminal if you 15
detected.
only have one surround back speaker.
Try running AUTO SETUP in a quiet environment. -
E-5:NOISV
Background noise is too loud.
Tum otT noisy electric equipment like air conditioners
or move them away from the optimizer microphone.
-
Surround back speaker(s) is (are)
Connect surround speakers when you use (a)
E-6:CHECK SUR.
connected, though surround LlR speakers
surround back speaker(s).
15
are not.
E-7:NO MIC
The optimizer microphone was unplugged Connect the supplied optimizer microphone to
32
during the AUTO SETUP procedure. OPTIMIZER MIC jack on the front panel.
The optimizer microphone does not detect
Check the microphone setting.
32
E~8:NO
SIGNAL
test tones.
Check the speaker connections and placement.
15
E-9:USER CANCEL
The AUTO SETUP procedure was
Run AUTO SETUP again. 32
cancelled due to user activity.
E-10:INTERNAL
An internal error occurred. Run AUTO SETUP again.
32
ERROR
115