Yamaha RX-V1600 Owner's Manual page 26

CONNECTIONS
• Video jacks
This unit has four types of video jacks (composite, component, S-video and HDMI). Connection depends on the
availability of input jacks on your monitor. When V CONY. is set to ON (see page 85), the analog video signals input at
the VIDEO, S VIDEO and COMPONENT VIDEO jacks can be output at the VIDEO, S VIDEO and COMPONENT
VIDEO jacks interchangeably. In addition, when V CONY. is set to ON (see page 85) and HDMI lIP is set to ON (see
page 86), the analog video signals input at the VIDEO, S VIDEO and COMPONENT VIDEO jacks can be digitally up-
converted and output at the HDMI OUT jack.
VIDEO
SVIDEO
o
COMPONENT VIDEO
Y PB PR
~@~
HOMI
rn
VIDEO jacks
For conventional composite video signals.
S VIDEO jacks
For S-video signals, separated into luminance (Y) and
color (C) video signals to achieve high-quality color
reproduction.
• Video signal flow for MONITOR OUT
Input
COMPONENT VIDEO jacks
For component signals, separated into luminance (Y) and
color difference (PB,
PR)
to provide the best quality in
picture reproduction.
HDMI jacks
For HDMI digital video signals.
Output
(MONITOR OUT)
HDMI
SVIDEO
VIDEO
~
] Dignal
ymoo
~~~
~oooO
~
Analog video
~
- - - - t ..
~
Through
________ ... Component interlace/progressive conversion (see page 85)
- - - - - - - - i>
HOMI interlace/progressive up-conversion (see page 86)
• The analog video signals output at the COMPONENT VIDEO jacks can be deinterlaced from 480i to 480p. Set CMPNT lIP to ON in
MANUAL SETUP to activate this feature (see page 85).
• The analog video signals input at the COMPONENT VIDEO jacks and output at the S VIDEO or VIDEO jacks cannot be converted to
480p/I080i1720p.
• When the analog video signals are input at the COMPONENT VIDEO, S VIDEO and VIDEO jacks, the priority order of the input
signals is as follows where the analog video signals input at the COMPONENT VIDEO jacks have the top priority.
I. COMPONENT VIDEO
2. S VIDEO
3. VIDEO
• Component interlace/progressive conversion (see page 85) and HDMI interlace/progressive up-conversion (see page 86) are available
only when V CONY. is set to ON (see page 85).
22
CONNECTIONS
• Video jacks
This unit has four types of video jacks (composite, component, S-video and HDMI). Connection depends on the
availability of input jacks on your monitor. When V CONY. is set to ON (see page 85), the analog video signals input at
the VIDEO, S VIDEO and COMPONENT VIDEO jacks can be output at the VIDEO, S VIDEO and COMPONENT
VIDEO jacks interchangeably. In addition, when V CONY. is set to ON (see page 85) and HDMI lIP is set to ON (see
page 86), the analog video signals input at the VIDEO, S VIDEO and COMPONENT VIDEO jacks can be digitally up-
converted and output at the HDMI OUT jack.
VIDEO
SVIDEO
o
COMPONENT VIDEO
Y PB PR
~@~
HOMI
rn
VIDEO jacks
For conventional composite video signals.
S VIDEO jacks
For S-video signals, separated into luminance (Y) and
color (C) video signals to achieve high-quality color
reproduction.
• Video signal flow for MONITOR OUT
Input
COMPONENT VIDEO jacks
For component signals, separated into luminance (Y) and
color difference (PB,
PR)
to provide the best quality in
picture reproduction.
HDMI jacks
For HDMI digital video signals.
Output
(MONITOR OUT)
HDMI
SVIDEO
VIDEO
~
] Dignal
ymoo
~~~
~oooO
~
Analog video
~
- - - - t ..
~
Through
________ ... Component interlace/progressive conversion (see page 85)
- - - - - - - - i>
HOMI interlace/progressive up-conversion (see page 86)
• The analog video signals output at the COMPONENT VIDEO jacks can be deinterlaced from 480i to 480p. Set CMPNT lIP to ON in
MANUAL SETUP to activate this feature (see page 85).
• The analog video signals input at the COMPONENT VIDEO jacks and output at the S VIDEO or VIDEO jacks cannot be converted to
480p/I080i1720p.
• When the analog video signals are input at the COMPONENT VIDEO, S VIDEO and VIDEO jacks, the priority order of the input
signals is as follows where the analog video signals input at the COMPONENT VIDEO jacks have the top priority.
I. COMPONENT VIDEO
2. S VIDEO
3. VIDEO
• Component interlace/progressive conversion (see page 85) and HDMI interlace/progressive up-conversion (see page 86) are available
only when V CONY. is set to ON (see page 85).
22