Your router requires an Internet source. Insert supported
USB or ExpressCard modem/s, connect a Cable or DSL
modem to the Blue Ethernet WAN port, or connect to an
available WiFi source. For Failover/Failback functionality,
you will need at least two of these sources (for example: one
Ethernet source and one USB modem).
Connect the 12v DC power adapter to the router and a
power source. Flip the power switch to the ON position; this
should illuminate the green Power Status LED.
1
Data Modem Not Included. This Product Requires an Activated Data Modem or Phone with Data Plan for Full Functionality. See your Cellular/3G/4G Service Provider for Details