Cradlepoint MBR1200B Product Manual page 125

MBR1200B| USER MANUAL Firmware ver. 3.6.0
CRADLEPOINT
7.4.8 VPN with NAT-T
If one side of a planned VPN tunnel is behind a NAT (network address translation) firewall, the setup of your tunnel
requires the following specifications:
1. Each side of the tunnel must use both a Local Identity and a Remote Identity. These must match the identities on
the other side: The Local Identity must match the Remote Identity on the other side of the tunnel, and vice versa. In
this case, these identities can each be a simple word.
2. The Tunnel Name for the side of the tunnel that is not behind the NAT firewall must be ―anonymous‖.
3. The VPN tunnel must be initiated from the side that is behind the NAT firewall.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 123