MBR1200B| USER MANUAL Firmware ver. 3.6.0
CRADLEPOINT
Ethernet Port Configuration
Ethernet Port Configuration provides controls
for your router's Ethernet ports. There are five
total ports: one blue port and four numbered
yellow ports. While default settings will be
sufficient in most circumstances, you have the
ability to control: Mode (WAN or LAN) and
Link Speed. Additional controls for WAN ports
are available in Internet → Ethernet
Settings.
Mode: WAN or LAN. Default setting is WAN
(Wide Area Network) for the blue port and LAN
(Local Area Network) for the four yellow ports.
Internet (WAN) is used to connect to another network such as a hotel or office wired network. The WAN
connection is used as a possible source of Internet for the MBR1200B.
Local Network (LAN) is for connecting a computer or similar device directly to the router with an Ethernet cable.
Link Speed: Default setting is Auto. The Auto setting is preferred in most cases.
Auto
10Mbps - Half Duplex
10Mbps - Full Duplex
100Mbps - Half Duplex
100Mbps - Full Duplex
1000Mbps - Full Duplex
© 2012 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 80