Cradlepoint MBR1200B Product Manual page 67

MBR1200B| USER MANUAL Firmware ver. 3.6.0
CRADLEPOINT
Remote Administration Access
6.4.5
Control (Advanced)
Enable Remote Administration Access
Control: Selecting this option allows you to
make remote administration tools available
to only the specified IP addresses. Access
from all other IP addresses will be blocked.
This option only filters IP addresses: you
must enable Remote Management
separately (System Settings →
Administration).
The services affected by this include remote HTTP, HTTPS, SNMP, and SSH configuration tools. This does not restrict
access to LAN-based administration, i.e. devices within your network still have administration access. The individual
remote administration services can be enabled under System Settings → Administration --> Remote Management.
Remote Administration Access Control Editor
IP Address: The IP address that will be allowed to access
administrative services through the WAN.
Netmask (Optional): The netmask allows you to specify
what IP address sets will be allowed access. If this field is
left empty a netmask of 255.255.255.255 will be used,
which means that only the single specified IP address
would have remote administration access.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 65