Cradlepoint MBR1200B Product Manual page 78

MBR1200B| USER MANUAL Firmware ver. 3.6.0
CRADLEPOINT
6.7.3 Local Network Interfaces
Both LAN types—WiFi and Ethernet—have separate sections with configuration options. Unless the default configuration
is sufficient, YOU MUST CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired interface options
for a network. You can then select these interfaces to add to a network in the Local Network Editor (see above).
Select from the following tabs:
 Wireless (WiFi) Network Settings
 Ethernet Port Configuration
Wireless (WiFi) Network Settings
The MBR1200B can broadcast two SSIDs
(service set identifiers — the names for
WiFi networks). One primary WiFi network
is enabled by default, while you may have
enabled a second guest network when
using the First Time Setup Wizard. You
have the ability to change the settings for
either of these networks.
Wireless Radio: Enable/Disable. (Default:
Enabled). Leave enabled unless you don't
want any WiFi networks broadcast from
your router.
Select a WiFi network and click Edit to change the settings.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 76