Quick Start; Basic Setup - Cradlepoint MBR1400 Product Manual

MBR1400 | USER MANUAL – Firmware version 5.0
CRADLEPOINT

3 QUICK START

3.1 Basic Setup

• Your router requires an Internet source. Attach a
Cradlepoint business-grade modem, insert one or
more supported USB or ExpressCard modem(s),
connect a cable or DSL modem to the blue Ethernet
WAN port, or connect to an available WiFi source. For
failover/failback functionality, you will need at least
two of these sources (for example: one Ethernet
source and one USB modem).
• Attach the three included WiFi antennas to the
connectors for maximum WiFi broadcast. To
attach, hold the antenna straight and twist the
base of the antenna to connect, folding the joint if
needed. Please note that 2.4 GHz antennas are
provided. 5 GHz antennas are available as an
accessory.
• Connect the 12v DC power adapter to the router
and a power source. Flip the power switch to the
ON position; this illuminates the green power
status LED.
1
This product requires a data modem with an active data plan for full
functionality. Data modem only included with ARC models. See your 3G/4G
service provider for details on coverage and data plan options.
© 2013 CRADLEPOINT, INC.
1
PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
For full 3G/4G functionality, attach one (or more) of the
following:
FOR MORE HELP AND RESOURCES PAGE 21