Quick Start; Basic Setup - Cradlepoint MBR1400 Series Product Manual

MBR1400| USER MANUAL Firmware ver. 3.3.0
CRADLEPOINT

3 QUICK START

3.1 Basic Setup

 Your router requires an internet source. Attach a
CradlePoint Business Grade Modem, insert supported USB
or ExpressCard modem/s, connect a Cable or DSL modem
to the Blue Ethernet WAN port, or connect to an available
WiFi source. For Failover/Failback functionality, you will
need at least two of these sources (for example: one
Ethernet source and one USB modem).
 Attach the three included WiFi antennas to the connectors
for maximum WiFi broadcast. To attach, hold the antenna
straight and twist the base of the antenna to connect,
folding the joint if needed. Please note that 2.4 GHz antennas are provided. 5 GHz antennas are available as an
accessory.
 Connect the 12v DC power adapter to the router and a power source. Flip the power switch to the ON position; this
should illuminate the green Power Status LED.
1
Data Modem Not Included. This Product Requires an Activated Data Modem or Phone with Data Plan for Full Functionality. See your Cellular/3G/4G Service Provider for Details
on Coverage and Data Plan Options
© 2011 CRADLEPOINT, INC.
1
PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 10