Whirlpool Operation - Jacuzzi SALON SPA BATH SERIES Installation And Operation Instructions Manual

Salon™ Spa Bath

Whirlpool Operation

ON: Press the jet button once to turn the whirlpool jets
ON.
The whirlpool motor will be on high speed. The indicator
lights at left will illuminate brightly.
OFF: Press the jet button a second time to turn the
whirlpool jets OFF.
If in chromatherapy lighting mode or blower mode
(indicator lights to the left of the jet button are dim),
you will need to press jet button once to resume
whirlpool operation mode and then a second time to
turn the whirlpool power off.
Decrease Speed
Press the (-) button to decrease whirlpool speed.
There are 2 whirlpool motor speeds, high and low. The
indicator lights display the setting.
•
1 light on = Low speed
•
4 lights on = High speed
Increase Speed
Press the (+) button to increase whirlpool speed.
There are 2 whirlpool motor speeds, high and low. The
indicator lights display the setting.
•
1 light on = Low speed
•
4 lights on = High speed
Air Flow
Press the left air valve button to activate the left air
valves, press the right air valve button to activate the
right air valves.
The amount of air induced into the whirlpool jets can be
controlled from maximum to none. Use the (+) and (-)
buttons to increase or decrease air flow.
The indicator lights immediately to the left and right of the
air valve buttons indicate the amount of air induced (show
images of max = 4 lights and off = 1 light).
Installation and Operation
Low
Low
www.jacuzzi.com
Jet
High
High
Left Right
Page 19