Normal Operation/Whirlpool System; Air Blower; Water Rainbow; Silent Air Induction - Jacuzzi Platinum Series Owner's Manual

Normal Operation/Whirlpool
System
You can enjoy the spa with or without activating the
whirlpool. Either way, bathing in your spa can be
pleasurable, as well as therapeutic.
stressful day, you can look forward to soaking in your
spa in still water with no turbulence—only the gentle
warmth of the soothing and relaxing water.
For a more invigorating spa experience, you can
take advantage of the built-in whirlpool system. To do
this, press the JETS button for one bank or both banks
of JETS. Sit or recline in the spa so you are comfortable.
Since all the jets are directionally adjustable, you can
direct a jet toward an area where muscles feels tense or
stiff. The warmth of the water and the stimulating water
flow from the jets will pleasantly increase circulation.
For the total whirlpool effect and all over feeling of
well being, you can adjust all jets so they point in a
clockwise or counterclockwise direction to circulate the
air and water mixture in a circular motion all about the
spa.
™

Water Rainbow

Activate the waterfall feature by rotating downward
the flow control lever located on the left side of the spout.
Use this lever to adjust the amount of water flowing
through the Water Rainbow spout. Turning OFF the flow
at the fully adjustable jets will dramatically increase flow
through the Water Rainbow and other jets.
CAUTION: The water circulating through the Water
Rainbow spout is not fresh water and therefore is
NOT suitable for drinking.
WATER RAINBOW
OPERATION

Air Blower

The spa features a built-in air blower and air jets in
the seats of the spa to add to your enjoyment.
The blower sends air to air injectors located in the
spa's seats and as the pressurized air is released, tiny
After a busy,
bubbles are formed. These bubbles travel upward
through the water and expand until they reach the
surface and burst. The exciting visual effect of the
bursting bubbles contributes to the overall hydromas-
sage experience.
DIRECTIONALLY ADJUSTABLE
WHIRLPOOL JETS

Silent Air Induction

The intensity of the whirlpool action is determined by
how much air is inducted into the water. You control this
by adjusting the air induction control knobs located on
spa rim. For maximum air induction, rotate each control
knob fully counter clockwise to the largest circle. For
fewer air bubbles, decrease the amount of air induction
by rotating the control knobs clockwise. When the knobs
are turned to the smallest circles, only water is being
circulated. (Refer to illustration below.)
AIR INDUCTION CONTROLS
Six-Jet Wave Seat
The six-jet wave seat is operational when the jet
pump for that side is turned on.
FULLY ADJUSTABLE
WHIRLPOOL JETS
INCREASE AIR FLOW
(COUNTERCLOCKWISE)
DECREASE AIR FLOW
(CLOCKWISE)
9