Fueling Instructions - Husqvarna HUV 4214 User Manual

Gasoline utility vehicles
Table of Contents

Advertisement

FUELING INSTRUCTIONS

See General Warnings on page 10.
DANGER
• Turn the key switch to the OFF position before fueling.
• Do not pour fuel into the fuel tank when the engine is hot or while it is running.
• To avoid electric arc caused by static electricity, the fuel storage/pumping device must be grounded. If
the pump is not grounded, the vehicle must be grounded to the pump before and during the fueling
operation.
• To avoid the possibility of fire, clean up any spilled fuel before operating the vehicle.
1.
Remove the fuel cap and fill the tank with fuel. See preceding DANGER and following NOTE.
NOTE: Use unleaded gasoline only. Whenever possible, avoid using oxygenated fuels and fuels that are blended
with alcohol.
2.
Replace the fuel cap. Ensure that the cap is tightened securely.
3.
Clean any spilled fuel from the cap or around the fuel cap area.
1. Fuel Cap
2. Fuel Tank
816
Figure 28 Fuel Tank
2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner's Manual
Fueling Instructions
Page 43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents