Table of Contents
Advertisement
Engine Oil
26
Figure 18 Remove Engine Oil Filter
4.
Use a clean, lint-free rag to wipe the oil filter port flange surface clean where the oil filter gasket seats.
5.
To help seal the new oil filter to the oil port flange, apply a light coat of white lithium NLGI Number 2 grease
(Dow Corning
®
BR2-Plus or equivalent) or new engine oil to the rubber seal around the outside surface of the
filter before attaching it to the oil filter port (Figure 19). Install the new oil filter onto the engine oil filter port.
See following NOTE.
NOTE: Use only engine-compatible oil filters designed for your engine.
6.
Tighten the oil filter by hand 2/3 turn after gasket contact. Do not use a band wrench or channel lock pliers.
806
Figure 20 Add Engine Oil
Page 38
2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner's Manual
27
Figure 19 Coat Rubber Seal
Hide quick links:
Advertisement
Table of Contents
