Periodic Lubrication Schedule - Husqvarna HUV 4214 User Manual

PERIODIC SERVICE SCHEDULE
REGULAR INTERVAL
Annual service by trained technician only
(or every 100 hours of operation, whichever
comes first)
WARNING
• If any problems are found during scheduled inspection or service, do not operate vehicle until repairs
are made. Failure to make necessary repairs could result in fire, property damage, severe personal
injury, or death.

PERIODIC LUBRICATION SCHEDULE

PERIODIC LUBRICATION SCHEDULE
REGULAR INTERVAL
First change 5 - 8 hours –
additional change every 100
hours of operation or annually,
whichever comes first
Change every 50 hours of
operation or semiannually
whichever comes first
Change every 100-400 hours
of operation or semiannually
whichever comes first
First change 50 hours –
additional change every 100
hours of operation or annually,
whichever comes first
SERVICE
Engine
Engine air intake system
General vehicle
Fuel filters
Clutch cover vent inlet filter (if equipped)
SERVICE
Change engine oil and oil filter
Driveshafts and bearing blocks
Change front differential lubricant
Change rear transaxle lubricant
2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner's Manual
Check for leaks around gaskets, fill plugs, etc.
Adjust valve clearance. See Briggs and
Stratton Vanguard Model 2900000 Service
Manual.
Inspect, clean, and gap spark plug; replace if
necessary. See authorized dealer or trained
technician for service.
Replace air filter element. See Air Intake
System on page 42.
Check clamps for tightness; check hose for
cracks.
Check for loose hardware and tighten if
necessary.
Replace. Dispose of used filters properly.
Replace. Dispose of used filters properly.
LUBRICATION
RECOMMENDED LUBRICANT
POINTS
1 - 1/2 qt. (1.4L) with filter, 10W-30 API
classification SJ See Oil Viscosity
Chassis Lube (EP NLGI Grade 2)
5 oz. (170 mL) 80W90 Gear Oil
1 gal. (3.79 L) 10W-30 SF, SG, SH
Periodic Lubrication Schedule
on page 39.
Page 33