Periodic Lubrication Schedule - Husqvarna HUV 4213-G 2008 Owner's Manual

PERIODIC LUBRICATION SCHEDULE

PERIODIC LUBRICATION SCHEDULE
REGULAR INTERVAL
Semiannually by owner or
trained technician (or every 50
hours of operation, whichever
comes first)
Annually by trained technician
only (or every 100 hours of
operation, whichever comes
first)
First change 100 hours –
additional change every 200
hours of operation or annually,
whichever comes first
SERVICE
Brake pedal shaft bearings
Accelerator push rod pivots, mounts,
and shifter cable pivots
Front suspension (2 fittings)
Check/fill transaxle to plug level
Inspect front wheel bearings (Repack
as necessary)
Change engine oil and oil filter
2
6
Figure 15
2008 HUV 4213-G and HUV 4213-GXP Owner's Manual
Get other manuals https://www.bkmanuals.com
LUBRICATION
POINTS
1
2
1
1
2
167
Lubrication Points
Periodic Lubrication Schedule
RECOMMENDED LUBRICANT
Dry Moly Lube (P/N 603 00 00-01)
Dry Moly Lube (P/N 603 00 00-01)
Chassis Lube (EP NLGI Grade 2)
29 oz. (.85 liters) 80-90 Wt. API
Class GL-3 or 80-90 Wt. AGMA Class
5 EP gear lubricant
Chassis Lube (EP NLGI Grade 2)
32 oz. (0.95 liter) without filter; 38
oz. (1.12 liters) with filter. See Oil
Viscosity on page 34.
5
3
2
3
5
Page 29