Igmp Snooping Commands - D-Link xStack DES-3500 Series Cli Manual

Layer 2 managed stackable fast ethernet switch
Hide thumbs Also See for xStack DES-3500 Series:
Table of Contents

Advertisement

The IGMP Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
config igmp_snooping
config igmp_snooping querier
config router_ports
config router_ports forbidden
enable igmp snooping
show igmp snooping
disable igmp snooping
show igmp snooping group
show router ports
show igmp_snooping
forwarding
show igmp_snooping group
create igmp_snooping
multicast_vlan
config igmp_snooping
multicast_vlan
delete igmp_snooping
multicast_vlan
show igmp_snooping
multicast_vlan
Each command is listed, in detail, in the following sections.
config igmp_snooping
Purpose
Syntax
Description
Parameters
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Parameters
[<vlan_name 32> | all] {host_timeout <sec 1-16711450> | router_timeout
<sec 1-16711450> | leave_timer <sec 0-16711450> | state [enable |
disable]}
[<vlan_name 32> | all] {query_interval <sec 1-65535> | max_response_time
<sec 1-25> | robustness_variable <value 1-255> |
last_member_query_interval <sec 1-25> | state [enable | disable]}
<vlan_name 32> [add | delete] <portlist>
<vlan_name 32> [add | delete] <portlist>
forward_mcrouter_only
vlan <vlan_name 32>
vlan <vlan_name 32>
{vlan <vlan_name 32>} {static | dynamic | forbidden}
{vlan <vlan_name 32>}
{vlan <vlan_name 32>}
<vlan_name 32><vlanid 2-4094>
<vlan_name 32> {member_port <portlist> | source_port <portlist> | state
[enable | disable] | replace_source_ip [ipaddr]}
<vlan_name 32>
{<vlan_name 32>}
Used to configure IGMP snooping on the Switch.
config igmp_snooping [<vlan_name 32> | all] {host_timeout <sec
1-16711450> | router_timeout <sec 1-16711450> | leave_timer
<sec 0-16711450> | state [enable | disable]}
This command allows the user to configure IGMP snooping on the
Switch.
<vlan_name 32> − The name of the VLAN for which IGMP snooping
is to be configured.
host_timeout <sec 1-16711450> − Specifies the maximum amount of
time a host can be a member of a multicast group without the Switch
receiving a host membership report. The default is 260 seconds.
router_timeout <sec 1-16711450> − Specifies the maximum amount
of time a route can be a member of a multicast group without the
IGMP S
NOOPING
136
22
C
OMMANDS

Advertisement

Table of Contents
loading

Table of Contents