Table of Contents
Advertisement
The switch history commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
?
dir
config command_history
show command_history
Each command is listed, in detail, in the following sections.
?
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To display all of the commands in the CLI:
To display the parameters for a specific command:
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Parameters
<value 1-40>
Used to display all commands in the Command Line Interface (CLI).
? {<command>}
This command will display all of the commands available through the
Command Line Interface (CLI).
{<command>} – Entering the question mark with an appropriate
command will list all the corresponding parameters for the specified
command, along with a brief description of the commands function and
similar commands having the same words in the command.
None.
DES-3500:admin#?
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config 802.1x reauth
config access_profile profile_id
config account
config admin local_enable
config arp_aging time
config arpentry
config authen application
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
C
OMMAND
253
38
H
L
ISTORY
IST
Advertisement
Table of Contents
