Asymmetric Vlan Commands - D-Link xStack DES-3500 Series Cli Manual

The asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections.
enable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable asymmetric VLANs:
DES-3500:admin#enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DES-3500:admin#
disable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable asymmetric VLANs:
DES-3500:admin#disable asymmetric_vlan
Command: disable asymmetric_vlan
Success.
DES-3500:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Parameters
Used to enable the asymmetric VLAN function on the Switch.
enable asymmetric_vlan
This command enables the asymmetric VLAN function on the Switch
None.
Only Administrator and Operator-level users can issue this command.
Used to disable the asymmetric VLAN function on the Switch.
disable asymmetric_vlan
This command disables the asymmetric VLAN function on the Switch
None.
Only Administrator and Operator-level users can issue this
command.
A
SYMMETRIC
112
17
VLAN C
OMMANDS