Tuner Operation; Auto Memory Entry; Station Preset Memory; Preset Tuning - Kenwood KDC-X993 Instruction Manual

Function of KDC-X993/ KDC-X693/ KDC-MP642U
Tuner Operation
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1
Enter Auto Memory Entry mode
Select "AUTO MEMORY':
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Open Auto Memory Entry
Turn the Control knob to select
"YES'~
and then
press the Control knob.
When 6 stations that can be received are put in the
memory, auto memory entry closes.
Station Preset Memory
Putting a station in the memory.
1
Select the frequency to put in the memory
Push the Control knob towards right or left.
2
Enter Preset Memory mode
Press the [
Q ]
button.
3
Select the number to put in the memory
Turn the Control knob.
4
Determine the number to put in the memory
Press the Control knob for at least 2 seconds.
Cancelling the Preset Memory mode
Press the [
Q ]
button.
Preset Tuning
Recalling the stations in the memory.
1
Enter Preset Tuning Select mode
Press the [
Q ]
button.
2
Select a desired station in the memory
Turn the Control knob.
3
Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [Q] button.
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"- - - -" is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
~
~
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
16 I
KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U