KDC-HD942U COMPONENTS DESCRIPTION ● ELECTRIC UNIT (X34-6320-10) Ref. No. Application / Function Operation / Condition / Compatibility IC10 A5V REG Power supply for A5V to DSP. IC11 AUD8V REF Power Supply Outputs 1.27V. IC61 D5V & P.ON5V SW REG Power supply for D5V to USB/PANEL and P.ON5V.
Page 4
KDC-HD942U COMPONENTS DESCRIPTION Ref. No. Application / Function Operation / Condition / Compatibility 3.2V REG Power supply for 3.2V. LED Driver Being controlled by IC1. Rotary (R) LED Driver Being controlled by IC1. Rotary (L) LED Driver Being controlled by IC1.
KDC-HD942U MICROCOMPUTER’S TERMINAL DESCRIPTION ● System μ-COM: IC602 on X34- (ELECTRIC UNIT) Truth Value Pin No. Pin Name Application Processing / Operation / Description Table WIRED REMO Remote control signal input Pulse width detection Not used Output L fi xed CD SYS DATA Data from system μ-com to Bolero...
Page 6
KDC-HD942U MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Value Pin No. Pin Name Application Processing / Operation / Description Table CD LOE LIM SW CD detection (chucking detection) H: Loading completed, L: No disc Panel operation control PAN SC CON H: Normal, L: Panel operation stopped (Becomes CE when system μ-com is rewritten)
Page 7
KDC-HD942U MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Value Pin No. Pin Name Application Processing / Operation / Description Table PWIC STBY Power IC standby POWER ON: H, POWER OFF: L LX REQ M Communication request to slave unit LX MUTE Mute request from slave unit...
Page 8
Power control (Stop) input Rising edge: ON, L: OFF (Same timing as LX-BUS) PROTOCOL SEL Communication protocol selection L: KAB (Kenwood Advanced Bus), H: LX-BUS L: Head unit (Over I2C) PHY SEL Physical layer selection H: Black box (Protocol compliant)
Page 9
KDC-HD942U MICROCOMPUTER’S TERMINAL DESCRIPTION ● Panel μ-COM: IC1 on X16- (SWITCH UNIT) Truth Value Pin No. Pin Name Application Processing / Operation / Description Table REMO Remote control signal input Pulse width detection Not used Output L fi xed BYTE...
Page 10
KDC-HD942U MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Value Pin No. Pin Name Application Processing / Operation / Description Table Data transmission and reception for ROM cor- ROM COR SDA Always output except in reading rection ROM COR SCL I/O Clock for ROM correction...
KDC-HD942U TEST MODE AUTO VOL/AUD SEARCH ● How to enter the test mode ● HD source test mode Press and hold the [FNC] and [AUD] keys and reset. (While (∗1) Display [1] key, [2] key, and [3] key on the multi-function “–...
Page 12
KDC-HD942U TEST MODE ● Specifi cation of the test mode for tuner source [Seek Stop Level Adjustment (Auto)] (Display) A T N _ 4. 3 2 V : When at Normal (Local OFF) The frequency of 98.3MHz is received when the [4] key is (Display) A T L _ 3.
Page 13
KDC-HD942U TEST MODE ● CD source test mode specifi cation ● AUDIO adjust mode · Jumps to the following tracks by pressing the [ ] key. · Press the [AUD] key briefl y to enter the audio adjustment No.9→No.15→No.10→No.11→No.12→No.13→No.22→ mode.
Page 14
KDC-HD942U TEST MODE ● Backup current measurement Table 1 - Version & Service information display mode ([1]~[6] keys: Remote controller) If reset while in ACC OFF (Back Up ON) condition, MUTE terminal goes off 2 seconds later, rather than 15 seconds.
Page 15
KDC-HD942U TEST MODE Table 2 - CD information display mode · DEMO mode shall not be operated while in the test mode, Backup/Installer Memory & CD Mechanism Infor- I2C communication condition and CD mechanism error log display mation & Service Information & DC offset Error Detection...
Page 16
KDC-HD942U TEST MODE ● Clearing backup / installer memory & CD E destination mother + M3 destination panel (M3 destina- tion: KDC-X7013UL/XBT8013UL) mechanism information & service information & DC offset error detection information (Clear- _ M o t h e r : E...
Page 17
KDC-HD942U TEST MODE When fi nished but unsuccessful 1: Mother E2PROM initial- 3. While the DC offset error detection condition is being ization NG displayed as above, press and hold [1] key for 2 seconds to clear the information about the improper connection,...
KDC-HD942U INSTALLER MEMORY SPECIFICATIONS At specialists (or specialty stores), when the installer sends Also, the setting values of all Preset Positions will be the vehicle back to the user, they may make the store-rec- memorized for the setting value of Manual Position. (6 ommended audio confi...
KDC-HD942U BACKUP MEMORY SPECIFICATIONS Settings by the user other than the installer memory items · When the backup power supply was taken out at times are saved into the E2PROM, and when the backup power of battery change or when the reset button was pressed,...
Page 20
KDC-HD942U PC BOARD PC BOARD (COMPONENT SIDE VIEW) (FOIL SIDE VIEW) DISPLAY UNIT DISPLAY UNIT EJECT X15-1220-10 (J76-0576-02) X15-1220-10 (J76-0576-02) RESET PROCESSOR UNIT PROCESSOR UNIT X17-2050-10 (J76-0612-02) X17-2050-10 (J76-0612-02) CN101 RESET C198 Q101 C126 R153 C125 C107 IC151 C106 C134...
Page 21
KDC-HD942U PC BOARD PC BOARD (COMPONENT SIDE VIEW) (FOIL SIDE VIEW) SWITCH UNIT (BLUE ILLUMI.) SWITCH UNIT (BLUE ILLUMI.) X16-6520-10 (J76-0577-02) X16-6520-10 (J76-0577-02) VOUT C122 R137 CP22 CP17 R139 ROM DET CP18 CP15 R140 CP21 ILL+B LCD+B SCC N PAN RST...
Page 26
KDC-HD942U PC BOARD (COMPONENT SIDE VIEW) X32 B/2 12EJE ORG LOS GRE GND BLU R105 CD PLAYER UNIT R102 X32-6260-00 A/2 (J76-0572-02) AGND CD RST IOP+ BUCK A3.3V R119 R177 CP11 R101 R121 12EJE SW R171 R118 LOS SW R117...
Page 27
KDC-HD942U PC BOARD (FOIL SIDE VIEW) X32 B/2 CD PLAYER UNIT X32-6260-00 A/2 (J76-0572-02) R127 R120 R128 CP15 R166 CP12 C102 R167 R68 R69 R132 R131 X32-6260-00 Ref. No. Address Refer to the schematic diagram for the values of resistors and capacitors.
Page 28
KDC-HD942U REAR ANT. INTERNAL CIRCUIT of X17-2050-10 PRE OUT FRONT ELECTRIC UNIT (X34-6320-10) W321 J401 TP344 HD FRONT-END (X17-2050-10) TU GND TP801 GND7 GND1 L801 GND6 TP802 GND5 VDD3.3V FRONT-END L802 TP803 VDD1.2V TP751 TP804 RFGND1 GND2 TP752 R807 FRONT...
Page 32
KDC-HD942U SWITCH UNIT (X16-65xx-xx) PAN5V ILL+B ∗ ∗ R97 3.3K 3.3K R98 3.3K LCD BACK LIGHT LED DRIVER BLUE LED DRIVER R95 3.3K R99 3.3K LED DRIVER BACK BACK LCD BACK LIGHT LIGHT LIGHT RED LED DRIVER DRIVER GREEN LCD BACK LIGHT...
Page 33
IC3 : PIC95603 : B30-1780-05 GND LINE IC4 : NOT USED D3-10 : B30-1781-05 B LINE IC7 : S-1112B32MCG D21-24 : B30-1798-05 D40,92 : LVS10C270S030 Q1-9,27-29,41 D93,94 : B30-3211-05 : KRC406-P D107,110 : B30-1784-05 PAN5V-1 KDC-HD942U (2/3) B38-1213-05 X16-6520-10 (2/2), X15-1220-10 (1/1)
Page 34
KDC-HD942U PROCESSOR UNIT A2 (X17-2050-10) VDD3.3V OSC1.2V VDD1.2V C116 C117 X101 RESET INVERTER R102 TP113 C101 C102 470P TP105 CLK OUT MEM CAS Q101 RESET N DVDD S MEM RAS TP111 MEM CS MEM B R104 47 I2C1 SCL MEM B...
Page 35
HOLD IBOC Q R150 I2S I BCK C151 IBOC I I2S I WS IBOC WS X34-632- I2S2 O SD/ IBOC BCK SPDIF O FLASH ROM RESET EVM IBOC SDA IBOC SCK OSC1.2V CN102 VDD1.2V VDD3.3V OSC1.2V KDC-HD942U (3/3) X17-2050-10 (2/2)
Page 36
KDC-HD942U CD PLAYER UNIT (X32-6260-00) (A/2) MECHA. (X92- ) SLED OUT /LOAD 4ch BTL DRIVER TP123 TP128 1.7V ZDET 7.5V POWVCC1 R132 100 TP124 LOADING & POWGND1 SLED IN SLED TP127 /EJECT SLIN MOTOR VO1- R131 200K LDIN SPDL+ VO1+...
KDC-HD942U PARTS LIST ✽ New parts Parts without Parts No. are not supplied. Les articles non mentionnes dans le Parts No. ne sont pas fournis. Teile ohne Parts No. werden nicht geliefert. Desti- Desti- Ref. No. Parts No. Description Ref. No.
Page 42
KDC-HD942U PARTS LIST SWITCH UNIT (X16-6520-10) Desti- Desti- Ref. No. Parts No. Description Ref. No. Parts No. Description nation nation R79 ,80 RK73GB2A473J CHIP R J 1/10W CK73GB1C104K CHIP C 0.10UF RK73GB2A106J CHIP R J 1/10W CK73GB1H153K CHIP C 0.015UF K...
Page 43
KDC-HD942U PARTS LIST CD PLAYER UNIT (X32-6260-00) IN CD MECHA Desti- Desti- Ref. No. Parts No. Description Ref. No. Parts No. Description nation nation CP10 RK74GA1J101J CHIP-COM 100 J 1/16W R110 RK73GB2A913J CHIP R J 1/10W R112,113 RK73GB2A4R7J CHIP R...
Page 44
KDC-HD942U PARTS LIST ELECTRIC UNIT (X34-6320-10) Desti- Desti- Ref. No. Parts No. Description Ref. No. Parts No. Description nation nation CK73GB1A474K CHIP C 0.47UF C516 CK73GB1A105K CHIP C 1.0UF C517-520 CK73GB1C224K CHIP C 0.22UF CK73FB0J106K CHIP C 10UF CK73GB1H102K CHIP C...
Page 45
KDC-HD942U PARTS LIST ELECTRIC UNIT (X34-6320-10) Desti- Desti- Ref. No. Parts No. Description Ref. No. Parts No. Description nation nation CP603 RK74GA1J101J CHIP-COM 100 J 1/16W R356 RK73GB2A2R2J CHIP R J 1/10W R357 RK73FB2B102J CHIP R 1.0K J 1/8W CP604...
Page 46
KDC-HD942U PARTS LIST ELECTRIC UNIT (X34-6320-10) Desti- Desti- Ref. No. Parts No. Description Ref. No. Parts No. Description nation nation R618 RK73GB2A223J CHIP R J 1/10W D141,142 1SR154-400 DIODE D143 1SS355 DIODE R619 RK73GB2A103J CHIP R J 1/10W R620 RK73GB2A473J...
Page 47
KDC-HD942U PARTS LIST ELECTRIC UNIT (X34-6320-10) Desti- Desti- Ref. No. Parts No. Description Ref. No. Parts No. Description nation nation DTC124EUA DIGITAL TRANSISTOR D21-2507-04 SHAFT DTC144EUA DIGITAL TRANSISTOR D21-2508-04 SHAFT DTC144EUA DIGITAL TRANSISTOR D23-0963-04 RETAINER Q121-123 2SC4081 TRANSISTOR D39-0277-15 DAMPER...
Frequency response (±1dB) ......10Hz~20kHz Total harmonic distortion (1kHz) ........0.010% Signal to Noise ratio (1kHz) .........105dB KENWOOD follows a policy of continuous advancements Dynamic range ..............93dB in development. For this reason specifi cations may be MP3 decode ..Compliant with MPEG-1/2 Audio Layer-3 changed without notice.