Making A Call; Dial A Number; Speed Dialing (Preset Dial) - Kenwood KDC-X993 Instruction Manual

Making a call
1
Enter dialing method mode
KDC-X993:
Press the
[((~J
button.
KDC-HD942U/ KDC-X693/ KDC-MP642U:
Press the
[((~J
button for at least 1 second.
2
Select a dialing method
Press the Control knob.
"DIAL:'» "INITIAL"» "PHONE BOOK"» "OUT-CALL"»
"I~~-CALL'» "MISSED CALLS"
Methods of operations in the above modes are
described below.
3
Exit the dialing method mode
Press the
[((~J
button.
Dial a number
1
Enter dialing method mode
KDC-X993:
Press the
[((~J
button.
KDC-HD942U1 KDC-X693/ KDC-MP642U:
Press the
[((~J
button for at least 1 second.
2
Select the number dial mode
Press the Control knob.
Select the "DIAL:' display.
3
Enter a phone number
Press the number ([1] - [0)), #([FM)), *([AM)), or
+([~))
button on the remote controller.
4
Make a call
Press the [DIRECT] button on the remote
controller.
To erase
the entered phone number digit by
digit:
Press the
[~J
button on the remote controller.
~
• You can input max 32 digits.
Speed dialing (Preset dial)
1
Enter dialing method mode
KDC-X993:
Press the
[((~]
button.
KDC-HD942U/ KDC-X693/ KDC-MP642U:
Press the
[((~]
button for at least 1 second.
2
Press the Control knob.
Select the "DIAL:: "PHONE BOOK'; "OUT-CALL:;
"IN-CALL:; or "MISSED CALLS" display.
3
Enter preset dial mode
Press the [
Q ]
button.
4
Select the number you want to recall from the
memory
Turn the Control knob or push it towards up or
down.
S
Press the Control knob.
Phone number is displayed.
6
Exit the preset dial mode
Press the [
Q ]
button.
7
Make a call
Press the Control knob for at least 1 second.
A
~
• You need to register the preset dial number. (page 23)
English I
21