Table of Contents
Advertisement
Press the Control knob for at least 1 second.
The current setting of PIN code is displayed.
3
Input the PIN code
Select the numbers.
3
By operating the cell-phone, start the hands-
free connection.
To clear the downloading completion message
Press any button.
b\
~
4
Register a PIN code
Press the Control knob for at least 1 second.
If"Completed" is displayed, registration is
completed.
5
Exit PIN code edit mode
Press the [FNC] button.
Move to the next digit.
Delete the last digit.
Push the Control knob towards left.
Up to 1000 phone numbers can be registered for each
registered cell-phone.
Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(*
50: Number of alphabetic alphabetical characters.
Fewer characters can be input depending on the type
of characters.)
• To cancel downloading of the phone book data, operate
the cell-phone.
b\
~
• By default, "0000" is specified.
• A PIN code can be specified with up to eight digits.
Downloading the Phone Book
Download the phone book data from the cell-
phone to this unit so that you can use the Phone
Book of this unit.
To download automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
b\
~
• Setting on the cell-phone may be required.
• If no phone book data is found in the unit even after
the compete display, your cell-phone may not support
automatic download of phone book data. In this case, try
downloading manually.
To
download
from
the cell-phone manually
1
By operating the cell-phone, end the hands-free
connection.
2
By operating the cell-phone, send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
• During downloading:
"Downloading" is displayed.
• After completion of downloading:
"Completed" is displayed.
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to
use.
1
Select Bluetooth device selection mode
Cell-phone
Select "MENU"
>
"Phone Selection':
Audio player
Select "MENU"
>
"Audio Selection':
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter Bluetooth device selection mode
Press the Control knob for at least 1 second.
"(name)" is displayed.
3
Select the Bluetooth device
Turn the Control knob.
4
Set up the Bluetooth device
Push the Control knob towards right or left.
'*(name)' or '-(name)' is displayed.
"*": The selected Bluetooth device is busy.
"-": The selected Bluetooth device is on standby.
" " (blank): The Bluetooth device is deselected.
5
Exit Bluetooth device selection mode
Press the [FNC] button.
b\
~
• If a cell-phone is already selected, deselect it, and then
select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
English I
37
Hide quick links:
Advertisement
Table of Contents
