Favorite Name Setting - Kenwood KDC-X993 Instruction Manual

Favorite Name Setting
Giving a name to Preset Memory registered to
Favorite.
1
Enter Preset Recall mode
Turn the Control knob.
2
Retrieve the Preset Memory to change
Turn the Control knob.
3
Enter Favorite Name set mode
Press the Control knob for at least 1 second.
Select the "FAVORITE NAME SET" display.
4
Enter the name
Move the cursor to the enter
character position
Select the character type*
Select the characters Turn the Control knob or push it
towards up or down.
* Each time you press the knob, the character type
alternates between the types shown in the table below.
Alphabet upper case
Alphabet lower case
Numbers and symbols
5
Exit Favorite Name Set mode
Push the Control knob towards right or left
to select
"ENTER'~
and then press the Control
knob.
Cancelling the Favorite Name set
Press the [FNC] button.
English
I 35