Other Functions; Activating Security Code; Deactivating Security Code - Kenwood KDC-X993 Instruction Manual

Other Functions
Activating Security Code
~
~
~
You can set the Security Code
V-lith
a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1
Select Security code mode
Select "MENU"
>
"Security Set"
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter Security Code mode
Press the Control knob for at least 1 second.
When "Enter" is displayed, "[-][-][-][-]" is also
displayed.
3
Enter Security Code
Select the Security Code
numbers
4
Confirm the Security Code
Press the Control knob for at least 3 seconds.
When "Re-Enter" is displayed, "[-][-][-][-]" is also
displayed.
5
Do the step 3 through 4 operation, and reenter
the Security Code.
"Approved" is displayed.
The Security Code function activates.
~
~
• If you enter the wrong Code in steps 3 through 4, repeat
from step 3.
6
Exit Security Code mode
Press the [FNC] button.
Entering Security Code
The Security Code is required to use the audio unit
when the unit is first used after removed from the
battery power source or the Reset button is pressed.
1
Turn the power ON.
2
Do the step 3 through 4 operation, and enter
the Security Code.
"Approved" is displayed.
Now, you can use the unit.
Deactivating Security Code
To deactivate the Security Code function.
1
Select Security code mode
Select "MENU"
>
"Security Clear"
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Security Code mode
Press the Control knob for at least 1 second.
When "Enter" is displayed, "[-][-][-][-]" is also
displayed
3
Enter Security Code
Select the Security Code
numbers
4
Press the Control knob for at least 3 seconds.
"Clear" is displayed.
The Security Code function deactivates.
5
Exit Security Code mode
Press the [FNC] button.
English
I
25