Connecting The Power Terminal - Samsung UH070CAV1 Installation Manual

Connecting the cable (Continued)
12
E-
Wiring Diagram of Connection Cord
1(L) 2(N) VC VC
Outdoor Unit
Note Ground wire for the indoor unit and outdoor unit connection
cable must be clamped to a soft
copper tin-plated eyelet terminal with M4 screw hole(NOT
SUPPLIED WITH UNIT ACCESSORIES).

Connecting the Power Terminal

Connect the cables to the terminal board using the compressed ring terminal.

Connect the rated cables only.

Connect using a driver which is able to apply the rated torque to the screws.

If the terminal is loose, fire may occur caused by arc.

If the terminal is connected too firmly, the terminal may be damaged.
Tightening Torque (ft.lb (kgf • cm))
M3 0.43(5.9)
Indoor Unit
F1 F2 V1 V2 F3 F4
Outdoor Unit
F1 F2 1(L) 2(N)
1 phase, 208-230V~
L N