Radio Communications; Configuring The Scanner; Accessories; Lanyard - Symbol LS4278 Product Reference Manual

1-14 LS4278 Product Reference Guide
For your convenience, a wall mount bracket can be purchased from Symbol Technologies. For the appropriate
measurements, and instructions on mounting the cradle, refer to the STB4208/4278 Quick Reference Guide
(p/n 72-71010-xx).

Radio Communications

The scanner can communicate with remote devices via Bluetooth Technology Profile Support, or by pairing with a cradle. For radio
communication parameters, detailed information about operational modes, Bluetooth Technology Profile Support and pairing, see
Chapter 4, Radio Communications.

Configuring the Scanner

Use the bar codes in this manual or the 123Scan configuration program to configure the scanner. See
each host chapter for information about programming the scanner using bar code menus. See
scanner using this configuration program. 123Scan includes a help file.

Accessories

The scanner and cradle accessories include:
• Intellistand for scanning in hands-free mode. For information about set up and use of Intellistand, see
Free Mode on page
• Power supplies for applications that do not supply power over the host cable. See each host interface chapter for set up
information.
• Wall-mount bracket for mounting the cradle vertically. Refer to the STB4208/4278 Cradle Quick Reference Guide
(p/n 72-71010-xx) for a wall mounting template and installation instructions.
• Lanyard for wearing the scanner on a wrist.

Lanyard

The lanyard attaches to the inside of the scanner battery door latch.
2-8.
Figure 1-10. Attached Lanyard
Chapter 5, User Preferences
Chapter 12, 123Scan to configure the
Scanning in Hands-
and